How to properly maintain the safety light curtain?
Times:2018-12-08 Hits:902 In the industry, machinery and equipment and other related industrial products will need to be maintained from time to time. The safety light curtain also needs daily maintenance. As long as the maintenance is good, the service life of the product will be extended, which better reflects the use value of the safety light curtain. .In the industry, machinery and equipment and other related industrial products will need to be maintained from time to time. The safety light curtain also needs daily maintenance. As long as the maintenance is good, the service life of the product will be extended, which better reflects the use value of the safety light curtain. .
Based on past customer usage and experience, summarize the following steps that require attention during maintenance:
One: check once every six months: When the machine settings need to be changed or every six months, it is necessary to check the performance and operation of the safety light curtain.
1. In order to ensure the performance of the safety light curtain is normal.
2. After the equipment is changed, confirm whether the safety light curtain can be used normally and whether the equipment system is properly connected.
3. Whether the system can be complete and correctly introduce the signal output by the safety light curtain.
4. Test, test whether the safety light curtain response time has changed, whether it is delayed.
5. Check whether the safety light curtain circuit, cable, connector, accessories, etc. are installed correctly.
6. Finally, pay attention to whether the safety light curtain should be clean and corroded.
Regular inspection and performance measurements of safety light curtains are recommended:
1. Observe whether the safety light curtain assembly has obvious damage.
2. The optical cover has not been scratched or soiled.
3. Check the safety light curtain for the presence of dangerous machinery and equipment that can complete the full protection operation.
4. The focus is on checking to ensure that the safety of the staff is truly protected.